TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 38 / 74

DynaJet® IC7140
98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx
1
2
3
4
5
6
7
8
9
A
37
NOZZLE FAVOURITES
Figure 5-24: Nozzle Favourites Screen
System Overview Options
►
Nozzle Presets – Use to select one of the up to five (5) nozzles to be the current nozzle for determining droplet size information
NOTE: When a rate controller is also on the system, the nozzle selected must match that which is selected on the rate controller.
►
Add Nozzle Button – Press to go to the Nozzle Selection screen to specify which nozzle should be assigned to the associated Nozzle Preset
button.
WARNING! With each nozzle change or when nozzles are replaced, a system calibration (steps NO. 5 CALIBRATE THE RATE CONTROLLER
REGULATION and NO. 6 CALIBRATE THE DYNAJET IC7140 SYSTEM in the "INITIAL START-UP & CALIBRATIONS" chapter) must be
completed before attempted operation. These configurations may affect Gain settings. Failure to properly configure and calibrate the system will
result in sub-standard performance.
Use these softkeys to assist in establishing settings:
Home – Press to go to the Home screen. Back One Screen – Press to return to the Home screen or
Operation Screen.
Non-Touchscreen UT Options
When using a UT that does not have a touchscreen, screen options will be available as additional softkeys not illustrated in the examples in this manual.
Use these softkeys to navigate through the options:
Up One Option – Use to highlight the next nozzle location up on the menu.
Down One Option – Use to highlight the next nozzle location down on the menu.
Nozzle Selection Location 1-5 – Use to go to the Nozzle Selection screen to
specify which nozzle should be assigned to nozzle location 1
Nozzle Presets
Current Nozzle
S
of
tk
ey
s
Add Nozzle Buttons