TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 28 / 74

DynaJet® IC7140
98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx
1
2
3
4
5
6
7
8
9
A
27
Errors
Initialisation errors and lost communication appear on the Home
screen to alert the operator of certain issues and prevent the console
from entering operation mode until rectified.
•
Nozzles – the number of nozzles on the sprayer does not
match the DynaJet IC7140
•
Drivers – at least one driver is not present on the sensor BUS
•
Boom Module – communication to a BIM has been lost
•
Start Terminator – the start terminator not detected
•
End Terminator – the end terminator not detected
Figure 4-7: Quick Overview Error Example
Use the SYSTEM OVERVIEW KEY to get more details on the
offending system component which is displayed in red with an error
icon.
Figure 4-8: System Overview Error Example
See the “SYSTEM OVERVIEW” chapter or “APPENDIX B –
TROUBLESHOOTING GUIDE” for more details.
Disengage Mode
While in Disengage mode, all DynaJet functions are locked off and
cannot be activated nor accessed. Rate controller functions may
continue after properly shutting off any application and entering
Disengage Mode. Disengage mode will display the current speed.
Activating Disengage Mode
1. From the Home Screen, press the DISENGAGE MODE KEY.
Deactivating Disengage Mode
1. From the Disengage Screen, press the HOME KEY.
Figure 5-1: Disengage Screen