TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 5 / 74

SAFETY INFORMATION
98-01556-EN-R0_A4LT-SafetyNotices_INSERT.docx
1
IMPORTANT SAFETY INFORMATION
All safety related and operating instructions should be read before the system is operated. Safe operation of machinery is the operator’s
responsibility. Safety procedures must be posted close to the equipment and clearly visible to and legible by the operator. Safety procedures should
meet all company and local regulations, as well as MSDS-requirements. For assistance, contact a local dealer.
Safety Alert Symbol Definitions:
DANGER! This symbol is reserved for the most
extreme situations where serious personal injury or
death is imminent.
WARNING!
This symbol indicates a hazardous
situation that could result in serious personal injury or
death.
CAUTION! This symbol indicates a hazardous
situation that could result in minor or moderate personal
injury.
NOTE: This symbol addresses practices in which the
operator should be aware.
GENERAL WARNINGS AND PRECAUTIONS
DANGER!
•
Read and follow instructions. If instructions are unclear after reading the manual, please contact a local dealer.
•
Keep children away from equipment.
•
Do not operate machinery under the influence of alcohol or any illegal substance.
•
Some systems include a fan heater. Never cover the heater otherwise there will be a serious danger of fire!
WARNING! ELECTRICAL / SHOCK HAZARDS
•
Before working on any particular component, make sure that all power supplies have been switched off and cannot be
accidentally switched on.
•
Disconnect power leads before using an arc welder on equipment or anything connected to the equipment.
•
Systems including frequency drives have a risk of electric shock due to residual voltage. It is not permissible to open the
equipment neither to disconnect the system or any quick connection until 5 minutes after the power has been removed.
•
Only operate the system from the power source indicated in the manual. If you are not sure of the power source, consult
qualified service personnel.
•
Do not use a high pressure cleaner to clean electrical components. This could damage electrical components and subject the
operator to risk of electrical shock.
•
The electrical supply to the equipment must be properly routed and connected to the equipment. All connections must meet
the specified requirements.
WARNING! PRESSURISED HYDRAULIC SYSTEMS
•
Always wear personal protective equipment (PPE) when performing work on hydraulic systems.
•
Adhere to the machine manufacture’s approved maintenance instructions when working on the hydraulic system.
•
Always turn equipment off when working on the hydraulic system. Take appropriate precautions when opening systems that
have been previously pressurised.
•
Be aware that hydraulic oil may be extremely hot and under high pressure.
WARNING! CHEMICAL HANDLING
•
Always wear PPE when handling any chemical substance.
•
Always follow safety labels and instructions provided by the chemical manufacturer or supplier.
•
The operator should have full information on the nature and the quantity of the material to be distributed.
•
Adhere to FEDERAL, STATE AND LOCAL REGULATIONS REGARDING THE HANDLING, USE OR DISPOSAL OF
AGRICULTURAL CHEMICALS.
WARNING! PRESSURISED SPRAY SYSTEM
•
It is important to recognise proper safety precautions when using a pressurised spray system. Fluids under pressure can
penetrate skin and cause serious personal injury.
•
The system pressure should never exceed the lowest rated component. Always know your system and all component
capabilities, maximum pressures and flow rates.