TeeJet Technologies DYNAJET IC7 140 Скачать руководство пользователя страница 60

Страница: 60 / 74

DynaJet® IC7140

98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx

Alert
Code

Error

Description

Action

3030

Operation Error: All Solenoids
Closed

An issue on the system has occurred preventing access to
the Operation screen. To avoid additional issues, all
Solenoids have been closed.

Please stop application and address
the operation issue

3031

Solenoid Not Working Properly

Note: This alert is only available on

select configurations.

At least one or more solenoids are not opening or closing
completely.

Go to SYSTEM OVERVIEW for
details on the error(s).

3032

Turn Compensation Disengaged

Communication with the speed source has been lost.
Speed is required for turn compensation. Turn
compensation has been disengaged.

Verify speed source availability. Use
the Turn Compensation On key on
the Operation Screen to turn
compensation on.

3033

Missing Rate Controller: All
Solenoids Open

Communication with the Rate Controller has been lost. To
avoid additional issues, all Solenoids have been opened.

Verify Rate Controller is available
then restart the system.

3034

Missing Rate Controller: All
Solenoids Closed

Communication with the Rate Controller has been lost. To
avoid additional issues, all Solenoids have been closed.

Verify Rate Controller is available
then restart the system.

3100

Standard Turn Compensation
Unlock Successful!

The Standard Turn Compensation feature is now unlocked. Restart the system to begin using

Standard Turn Compensation.

3101

Standard Turn Compensation
Unlock Failed!

The Standard Turn Compensation feature remains locked.

Verify unlock code. Reenter unlock
code.

3102

Advanced Turn Compensation
Unlock Successful!

The Advanced Turn Compensation feature is now
unlocked.

Restart the system to begin using
Advanced Turn Compensation.

3103

Advanced Turn Compensation
Unlock Failed!

The Advanced Turn Compensation feature remains locked. Verify unlock code. Reenter unlock

code.

3104

Individual Nozzle Shutoff Unlock
Successful!

The Individual Nozzle Shutoff feature is now unlocked.

Restart the system to begin using
Individual Nozzle Shutoff.

3105

Individual Nozzle Shutoff Unlock
Failed!

The Individual Nozzle Shutoff feature remains locked.

Verify unlock code. Reenter unlock
code.

3106

Variable Rate (VRA) Unlock
Successful!

The Variable Rate (VRA) feature is now unlocked.

Restart the system to begin using
Variable Rate (VRA).

3107

Variable Rate (VRA) Unlock Failed! The Variable Rate (VRA) feature remains locked.

Verify unlock code. Reenter unlock
code.

Содержание DYNAJET IC7 140











































































Результаты поиска

Содержание DYNAJET IC7 140

Отзывы:

Похожие инструкции для DYNAJET IC7 140

Бренды по названию

Популярные бренды

TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Результаты поиска

Содержание DYNAJET IC7 140

Отзывы:

Похожие инструкции для DYNAJET IC7 140

Бренды по названию

Популярные бренды