3-15
3.4.5
Checking I/O signal status
--
Menu #4 "I/O Checking" --
Menu #4 "I/O Checking" in Programming mode allows you to check the I/O states of digital and analog signals. It is used
to check the running status during maintenance or test running.
Table 3.8 I/O Check Items
Page # in
operation
guide
Item
Symbol
Description
1
Input signals on the
control circuit
terminals
FWD, REV,
X1 - X7, EN
ON/OFF state of input signals on the control circuit terminal
block.
(Highlighted when short-circuited; normal when open)
2
Input signals via
communications link
FWD, REV,
X1 - X7, XF,
XR, RST
Input information for function code S06 (communication)
(Highlighted when 1; normal when 0)
3
Output signals
Y1 - Y4, Y5,
30ABC
Output signal information
4
I/O signals
(hexadecimal)
Di
Input signals on the control circuit terminal block (in
hexadecimal)
Do
Output signals (in hexadecimal)
LNK
Input signal entered via communications link (in hexadecimal)
5
Analog input signals
12
Input voltage on terminal [12]
C1
Input current on terminal [C1]
V2
Input voltage on terminal [V2]
6
Analog output signals
FM1
FM1
FM2
FM2
Output voltage on terminal [FM1]
*
Output current on terminal [FM1]
Output voltage on terminal [FM2]
Output current on terminal [FM2]
7
Input signals on the
digital input interface
card (option)
Di-o
Input signals on the option card in hexadecimal
Output signals on the
digital output interface
card (option)
Do-o
Output signals on the option card in hexadecimal
Pulse train input
X7
Pulse count signals of pulse train input on terminal [X7]
8
PG pulse rate
P1
Pulse rate (p/s) of the A/B phase signal fed back from the
reference PG
Z1
Pulse rate (p/s) of the Z phase signal fed back from the
reference PG
P2
Pulse rate (p/s) of the A/B phase signal fed back from the slave
PG
Z2
Pulse rate (p/s) of the Z phase signal fed back from the slave
PG
9
I/O signals of analog
input/output interface
card (option)
32
Input voltage on terminal [32] (option)
C2
Input current on terminal [C2] (option)
A0
Output voltage on terminal [A0] (option)
CS
Output current on terminal [CS] (option)
* Some screens differ depending upon the specifications even on the same inverter models.
Содержание EQ7 Series
Страница 1: ......
Страница 29: ...2 6 Unit inch mm Refer to Section 2 3 3 9 ...
Страница 94: ...4 25 Table B Motor Parameters Continued Three phase 460 V series EQ7 4_ _ _ C ...
Страница 152: ...4 83 Examples of Sequence Circuits 1 Standard sequence 2 Sequence with an emergency switching function ...
