Teac DV-L800, Руководство пользователя

Страница: 12 / 76

ENGLISH
Connection 1
12
CAUTION:
Switch off the power to all equipment before making connections.
Read the instructions of each component you intend to use with
this unit.
Be sure to insert each plug securely. To prevent hum and noise,
avoid bundling the signal interconnection cables together with
the AC power cord or speaker cables.
Connection to a TV
There are some ways of connecting the DV-L800 to your TV set or
monitor.
First check to see if your TV set or monitor has Component Video
Inputs. If it does, use them. The COMPONENT VIDEO connection
provides the best possible picture.
COMPONENT VIDEO OUT jacks
You need a set of three quality component video cables.
Connect each of them between the matched jacks (the red
output to the red input and so on).
< Once a connection with your TV set or monitor has been
made using a component video cable, check to see if your
TV or monitor is equipped for "Progressive Scan".
If it is, you have to set the DV-L800 to "PROG ON" as
discussed later under the heading of "Before Going On".
< For better picture quality, do not connect more than one
video cable.
< Please connect this unit to a TV directly. If the TV is
connected through a video cassette recorder, playback of a
copy protected DVD disc could result in a distorted picture
quality.
AV Connector (SCART)
If your TV or monitor is compatible with RGB SCART, you
should use this connection to realise the second best
picture quality.
Connect the component with a 21-pin RGB-ready SCART
cable, and select "RGB" in the SET UP menu. (see page 54)
< Both audio and video signals are output from this socket.
< The audio signal output from this socket is stereo. If you
want to enjoy surround sound, connect a Dolby Digital/DTS
decoder or an amplifier equipped with a built-in decoder via
the DIGITAL OUT terminal.
S-VIDEO or VIDEO jacks
S-VIDEO connection is better than composite (or VIDEO, as
opposed to S-VIDEO) connection.
If the component has a S-VIDEO jack, connect them with a
S-VIDEO cable.
S-VIDEO OUT (DV-L800) q S-VIDEO IN (TV)
If neither SCART nor S-VIDEO is available, connect the
component with a high quality RCA cable designed for video
applications.
VIDEO OUT (DV-L800) q VIDEO IN (TV)
C
B
A
AV-CONNECTOR
IN
A
B
C C
TV (MONITOR)