Teac DV-L800, Руководство пользователя

Страница: 46 / 76

ENGLISH
Programmed Playback
1
46
VCD / CD
Up to 99 tracks can be programmed in the desired order.
Note that the total time of the programmed tracks cannot exceed
"1 hour 39 minutes 59 seconds".
Press the PROGRAM button in the stop mode.
< Programming is possible during playback of CD, but once the
selection of track numbers has been finished and the PLAY
button is pressed, playback of the current track is stopped and
playback of the first programmed track will start.
Press numeric buttons to select a track.
example:
To select Track No.3, just press 3 (without first pressing 0).
Press the ENTER button.
The track is programmed.
Repeat steps
and to program more tracks.
PROGRAM No. TRACK No.
To clear a programmed track
Select the track with the 5 / b buttons, then press the CLEAR
button.
To clear all programmed tracks at once
After once pressing the PLAY button ( y ), press the STOP
button (
H
), then press the CLEAR button. "P-CLEAR" is displayed
momentarily to indicate that all programmed tracks are cleared
from memory.
When the selection of track numbers has been finished, press
the PLAY button to start programmed playback.
To switch to normal play
Press the STOP button (
H
), and press the PROGRAM button
then press the PLAY button ( y ).
To revert to playing a series of programmed tracks
Press the PROGRAM button in stop mode , then press the PLAY
button (
y ).
To check the order in which to play a series of programmed
tracks:
In stop mode with "PROG." lit, press the
5
/
b
buttons as many
times as necessary.
< If you press the REPEAT button and select "REPEAT ALL", the
programmed tracks will be played repeatedly.
< During programmed playback, the numeric buttons don't work.
<
If either of the following buttons is pressed, program mode will
be cancelled :
OPEN/CLOSE, POWER
4
3 2
3
2
1
4
3
2
Remote control: You need to display DVD/CD PAGE 2 by
pressing CD/DVD and P buttons.