TallyGenicom LGe06, Руководство оператора

Страница: 82 / 108

3–82
Operator Manual
IPDS Category (IPDS Only)
Use the Arrow and Enter keys to select
Menu => Config Menu => IPDS to get
here.
Address (Twinax Only)
This parameter sets the Twinax IPDS device address for the printer. This feature
allows the IPDS emulation to reside at a different address than the standard
Twinax SCS emulation, hence providing two virtual Twinax printers. The default
is Undefined.
Density
This parameter defines the dot density of the IPDS output. Low is 60x72, and
High is 144x144. Medium (120x144) is the default.
Dark Bar
This parameter has three possible settings: Low, Medium, and High, with the
default being Low. This affects the print density (and print speed) of bar codes
selected through any emulation of graphics language as follows: Low (60x72),
Medium (120 half spaced x 144), and High (120 full spaced x 144). This feature
also works in conjunction with the selection of bar code density used by Code V
and PGL (Normal vs. Dark). The densities will be set based on the previous Dark
Bar selection table.
Smooth Size
This parameter defines the character size at which the block character smoothing
algorithm is invoked. The default is 3, which means size 3 block characters will
be smoothed, but size 2 block characters will not.
Zero
Provides for the printing of open or slashed zero block character. Default is
slashed.
Host Override
The Host Override parameter gives you the option of allowing the host to control
DPI for Graphics and Bar Codes or to control Graphics and Bar Code Density
through the Control Panel. When Host Override is On, the host controls Graphic
and Bar Code DPI with the Execute Order Anystate (XOA) command and Print
Quality Control (PQC) Subcommand. When Host Override is Off, Graphics and
Bar Code DPI is controlled through the Control Panel settings for Density and
DarkBar parameters. The default is On.
Config Menu
⇒
IPDS