TallyGenicom LGe06, Руководство оператора

Страница: 102 / 108

C–102
Operator Manual
Power Supply
The printer requires single phase, 47 to 63 Hz. 90 to 264 VAC input power. The
printer’s universal power supply automatically adjusts to the correct values. A
fuse is provided to interrupt power to the power supply. The following table
gives typical current values.
6306 Current/Wattage Requirements @ Nominal Voltage
AC Volts
Freq. Average Peak Average Average
(RMS) (Hz)
Operating Operating Idle (<5 min.) Idle (>5 min.)
110 50 1.0 A/055 W 2.3 A/250 W 0.3 A/35 W 0.2 A/19 W
110 60 1.0 A/105W 2.3 A/250W 0.3 A/35W 0.2 A/19 W
220 50 0.5 A/105W 1.2 A/250W 0.2 A/35W 0.1 A/19W
6312 Current/Wattage Requirements @ Nominal Voltage
AC Volts
Freq. Average Peak Average Average
(RMS)
(Hz) Operating Operating Idle (<5 min.) Idle (>5 min.)
110 50 2.2 A/250 W 4.6 A/510 W 0.4 A/36 W 0.2 A/18 W
110 60 2.2 A/250W 4.6 A/510W 0.4 A/36W 0.2 A/18 W
220 50 1.1 A/250W 2.3 A/510W 0.2 A/36W 0.1 A/18W
Heat Load Contribution
The average heat load contribution to the environment is approximately 735
BTUs per hour (215 Watts). The minimum heat load contribution is approxi-
mately 100 BTUs per hour (30 watts). The maximum is 2050 BTUs per hour
(600 Watts), under continuous full-load printing conditions.
Printing Conditions (110 VAC/60 Hz) Wattage BTU/Hr
Power On, not printing 55 W 188
100% Uppercase Rolling ASCII 400W 1370
Black Page Plot 600 W 2050
Power Supply and Heat Load