TallyGenicom LGe06, Руководство оператора

Страница: 19 / 108

Chapter 1: Setting Up Your Printer
1–19
Figure 1 - 6. Left and Right Paper Tractors
Tractors
The LG Series has two tractors to control paper movement, located on the left
and right.
A lever on each tractor keeps it locked in place on a horizontal shaft. To reposi-
tion a tractor, unlock the tractor and move it to the left or the right along the
shaft. Repositioning is generally needed only when inserting a new form or size of
paper.
locking
lever
Tractors
Open
Paper System Components
Print Gap
The 6300 Series line printers offer Auto-Gap which simplifies operator set-up and
printer use by setting the optimum print gap based on the form thickness. The
print gap is automatically opened to its widest position when the printer is not
printing. To accommodate various thicknesses of paper, the print gap is adjusted
either automatically or manually. (See Chapter 2 pages 2-30 to 2-33 and Chapter 3
pages 3-56 to 3-58). If the Print Gap Detect Mode has been set to "Auto," the auto
gap sensing operation will take place the first time the power is turned on,
immediately after a "paper out" fault, when the TOF key is pressed, and when
printing is attempted without setting the Top Of Form. Dedicated control panel
keys also allow the print gap to be adjusted based on operator preference.
Paper Tension
Vertical tension on the paper is pre-set. It is not controlled by the user.