3–66
Operator Manual
Graphics Category
This category allows you to configure
certain aspects of the Graphic Processing
Options on your printer. Use the Arrow
and Enter keys to select Menu => Config
Menu => Graphics to get here.
Code V Cmd Char
This parameter allows you to change the CVCC. The Default is the ASCII caret
( ^ , Decimal 94, HEX 5E) character.
Smooth Size
This parameter controls the size at which block characters are “smoothed.” The
default is 3, which means that size 3 block characters will be smoothed, but size 2
block characters will not. This parameter is used by Code V and PGL.
PY Then
This parameter defines printer response to characters following the ^PY Com-
mand on the same line.
None:
All data, plus the line terminator are ignored (default)
All:
All data is executed
Term:
All but the terminator is ignored
Free Format: Depends on the state for Free Format Mode
PN Then
This parameter defines printer response to characters following the ^PN Com-
mand on the same line.
None:
All data plus the line terminator, are ignored (default)
All:
All data is executed
Free Format: Depends on the state for Free Format Mode
For PY Then and PN Then: Even though Code V documentation states that all other data on the
line is ignored, some Code V installations do not follow this rule.
Dark Bar
This allows you to set the base dot density at which bar codes will print. Low,
Medium, or High. Default is Low .
All bar codes will print at the selected density unless the user program requests a
higher density. When the user program requests a higher density, the printer will
switch to the next higher density than the base density. The following table shows
the density selections and how they change when the printer receives a program
request for a higher density than is selected:
Config Menu
⇒
Graphics
Содержание LGe06
