TallyGenicom LGe06 Скачать руководство пользователя страница 78

Страница: 78 / 108

3–78

Operator Manual

Twinax/Coax Category

Use the Arrow and Enter keys to select

Menu => Config Menu => Twinax/Coax to

get here.

Send PA (Coax Only)

There are two options for this parameter, PA1 and PA2. These options only have

meaning when the printer is in the SCS Mode. If they are selected while the

printer is in non SCS Mode, the Invalid Key error message will display briefly.

These options perform special functions that change from one software applica-

tion to another. Selecting one of these options while the printer is operating in

SCS Mode causes the printer to:

•

Display status code PA1 Key (61) or PA2 Key (62)

•

Send an attention response to the host computer.

•

Send a special operator request to the application program and wait for a

response back.

Certain application programs may ask you to select the PA1 or PA2 option in this

category. In this situation:

•

The printer display will read Enter PA Key (63).

•

The audible alarm beeps continuously.

•

The host opens a 10 minute "window" for one of the PA options to be

selected. If the correct PA option is not selected during this time, the

display clears, the audible alarm stops, and the printer sends a No PA Key

message to the host computer. The effect of this message is application-

dependent. Depressing the Online/Offline key clears this condition.

Address (Twinax Only)

Sets the Twinax device address for the printer. The default is Undefined.

SPD (Coax Only)

When set to Disabled, this parameter causes the host Set Print Density command

to be ignored. This is used to prevent the host from overriding control panel CPI

settings. Default is Enabled.

SCD (Twinax Only)

When set to Disabled, this parameter causes the host Set Character Density

command to be ignored. This is used to prevent the host from overriding control

panel CPI settings. Default is Enabled.

IPDS:

This option is not available.

SLD

When this parameter is set to Disabled, the host Set Line Density command is

ignored. This prevents the host from overriding control panel LPI settings. The

default is Enabled.

IPDS:

This option is not available.

Config Menu

⇒

Twinax/Coax

Содержание LGe06













































































































Результаты поиска

Содержание LGe06

Отзывы:

Похожие инструкции для LGe06

Бренды по названию

Популярные бренды

TallyGenicom LGe06, Руководство оператора

Результаты поиска

Содержание LGe06

Отзывы:

Похожие инструкции для LGe06

Бренды по названию

Популярные бренды