T-VIPS CP525 cMux, Руководство пользователя

Страница: 159 / 292

WEB Interface 159
ID: um_tsmux CP525 cMux User’s Manual Rev. 5.20.12 (3944)
Figure 8.76
Non-standard
table source PID configuration.
After making the changes in the grid press Apply to activate the changes. You can then go back
to the table listing to see whether the expected tables are received on the new PID value.
Warning: Changing the PID values used in the input filtering must be
performed with care. If you specify a PID that contains a high bandwidth
PID it may cause the unit to malfunction.
8.6.3 Switch
This page has two sub-tabs; Main and Alarms . In all sub-pages for a switch a list of current
alarms is shown. This list is identical to the list displayed in the Current Status view, and
described in section Section 8.3.1 .
8.6.3.1 Main
The Main sub page is used to configure input switching of a group of inputs. The page is
accessed by selecting a switch in the left hand side navigator on the Inputs tab, or by double
clicking the switch entry on the
Inputs Overview
>
Switch Inputs
page. See section Section
8.6.1.2
for instructions how to create a switch input.
The availability of input switching is determined by the SW licence key
Input switching
.
Ports can be added to the switch in two ways.
1. Drag physical ports in the left hand side navigator, dropping them into the switch
group at the wanted priority position.