T-VIPS CP525 cMux, Руководство пользователя

Страница: 101 / 292

WEB Interface 101
ID: um_tsmux CP525 cMux User’s Manual Rev. 5.20.12 (3944)
Required level for write
The required user level for TXP write accesses. This may only be edited if Mode is set to
Write
.
Below follows a simple example of how to get the units uptime. A description of the TXP
protocol can be found on the T-VIPS Product CD, or by contacting T-VIPS Support.
http://10.0.0.10/txp_get?path=/dev/time|_select:uptimetxt
<response request_id="0" method="txp_get" time_stamp="2012-08-17 11:14:20" version="1.0">
<status status="0" status_text="OK"/>
<data>
<dev>
<time uptimetxt="49 days 21h:56m:09s"/>
</dev>
</data>
</response>
8.4.5.4 SNMP Settings
The Simple Network Management Protocol (SNMP) is used to monitor network-attached devices
for conditions that warrant administrative attention. This page gives access to SNMP settings
such as destination IP addresses of trap receivers and community string. It Also displays a log
of the latest traps sent by the unit.
Figure 8.27 SNMP Settings
The
Trap Destination
table lets the user configure the trap servers that should receive SNMP
traps from the unit. To add a server click the
Add new
button, enter an IP address, then click
the Apply button. To delete an entry select a server entry from the list and click the Delete
button.