SYRUNS SY5000 series, Руководство пользователя

Страница: 84 / 115

User Manual of SY5000 series AC Drive Parameter instrction
~82~
P-013 display magnification of given value and feedback value
PID regulation function is enabled, namely When [P-000] = 1 and [P-013] = 10,
[E-001] value is the percentage of setting value in maximum value, then [E-001] value
is displayed according to blow equality:
[E-001] =
（
When [P-013] = 10, [E-001] value
）×
[P-013]
PID regulation function is enabled, namely When [P-000] = 1 and [P-013] = 10,
[E-001] value is the percentage of setting value in maximum value, then [E-001] value
is displayed according to blow equality:
[E-002] =
（
[E-002] value when [P-013] = 10
）×
[P-013]
PID regulation (group P) (for SY5000-P series only)
P-014 PID Sleep control selection
P-015 PID Sleep delay
P-016 PID Sleep frequency
P-017 PID Sleep wake-up value
P-018 PID Sleep wake-up delay
In the case of valid PID regulation, [P-014] is used to select sleep function
valid or not. In the case of valid sleep function, sleep function start up when output
frequency is lower than [P-016] setting; PID regulation stops after [P-015] setting
duration time, and AC Drive output frequency reduce to 0.00 which means stop into
sleep status.
Sleep wake-up function starts up when feedback value is higher than [P-017]
setting; PID regulation starts up after [P-018] setting duration time, and AC Drive
output frequency induces from 0.00 and finish sleep status into normal running status.
Note: Under these conditions, if Y1,Y2 are used as subtracting-pump signal,
sleep function starts up only when on adding-pump signal, otherwise not into sleep
status.
Group G code (for SY5000-P series only)
********************************************************************
*
Note: Ensure PID regulation function enabled before using ‘1 to 2 control’ function,
namely P-000 = 1.
********************************************************************