SYRUNS SY5000 series, Руководство пользователя

Страница: 14 / 115

User Manual of SY5000 series AC Drive Installation
~12~
1. Disassembly and assembly of small panel (terminal cover)
(1) Disassembly of small panel
As shown in Figure 2-3 (a), press two faces according to direction 1, meanwhile,
lift lower part of small panel according to direction 2.
(2) Assembly of small panel
As shown in Figure 2-3 (b),when assembly,firstly align small panel and big panel,
lean panels forward, embed bayonet shapes of panel in big panel, and then press
down the panels according to direction 2.
2. Disassembly and assembly of keypad
(1) Disassembly of keypad
As shown in Figure 2-4 (a), press the buckle on the side of keypad according to
direction 1, unhook it from big panel, lift it according to direction 2, and then get the
keypad.
(2) Assembly of keypad
As shown in Figure 2-4 (b),
stick Digital Console from the 1 directions the claw
locker A(place 2), pressing to keep toward 2 directions immediately after hearing the
“
click
”
voice, stick the claw locker B (place 2).
3. Disassembly and assembly of big panel
(1) Disassembly of big panel
As shown in Figure 2-5 (a),
make an effort toward 1 direction to press the two side
of console support, in the meantime, please press 2 directions to lift console support
lower part.
(2) Assembly of big panel
As shown in Figure 2-5 (b) ,
console support head two cards hang up to block from
the 1 directions the hull body(place 2), press to keep toward 2 directions immediately
after hearing the
“
click
”
voice.
2.2.2 Disassembly and assembly of terminal housing and keypad (
≥
11 kW)
1. Disassembly and assembly of terminal housing
(1) Disassembly of terminal housing
Use standard No. 1 crosshead screwdriver to take off two M4 screw bolts (as shown
in Figure 2-6 (a)), and then you can remove the terminal housings.
(2) Assembly of terminal housing
Use two M4 × 8 bolts to fix terminal housings (The direction is as shown in Figure