SYRUNS SY5000 series, Руководство пользователя

Страница: 74 / 115

User Manual of SY5000 series AC Drive Parameter instrction
~72~
By connecting frequency meter or voltage meter, it can remotely monitor output
frequency or output current of the inverter.
Please connect a meter (resistance is more than 2KΩ) which full scales is 10V,
manximum allowable output current is 10mA.
E-034 = 0
:
When output highest frequency, output voltage between FM-COM is
10V
；
E-034 = 1
:
When output rated current, output voltage between FM-COM is 5V.
Due to effect of load change, output current will contain ±15% bias
；
E-034 = 2
:
When output rated voltage, output voltage between FM-COM is 10V.
By setting E-035, it can adjust output voltage, so don’t need connect the variable
resistor for the use of full-scale calibration. Maximum output voltage is about 10.6V.
E-036 skip frequency 1
E-037 skip frequency 2
E-038 skip frequency 3
E-039 skip frequency width
Skip frequency function is mainly used to prevent mechanical vibration of the
load (noise) and avoid occurrence of resonance.
（
1
）
Jump point can be set up to 3, namely E-036, E-037, E-038
。
（
2
）
When jump width
(
E-039
)
is set as 0.00 Hz, jump is disabled
（
3
）
Three skip frequency ranges can overlap, but make sure E-036
＜
E-037
＜
E-038
，
the skip frequency overlap region will be consolidated.
（
4
）
This function applies to various situation of frequency settings.
E-040 motor stall level selection
E-041 motor stall level
E-040 = 1, the function of prevention current stall is enabled.