6
4- Close the tray cover.
FITTING THE SCANNING FEEDER AND THE PRINTER OUTPUT TRAY
k
j
m
1- Assemble the scanning feeder (j) and the printer
output tray (k) by bending the latter slightly.
2- Fit the resulting assembly into the two slots (m)
of the unit’s top cover.
l
The ribbing on the trays (l) must be facing towards the unit’s keypad.
G
FITTING THE PHOTOSENSITIVE DRUM
1- Open the cover housing the scanning assembly
by pressing simultaneously on the two buttons
located to either side.
2- Unpack the photosensitive drum.
Using the two handles, slot the right-hand-side
roller gear with its black protective sheath into
the runners (G)
4
1
2
2
1
3- Place a sheath of paper against the paper guard (a)
behind any remaining sheets of paper in the cover
(a red line in the paper tray indicates the maximum
capacity of the latter).
3
a
