Supermicro SuperServer 8048B-TRFT, Руководство пользователя

Страница: 74 / 84

Chapter 7: BIOS
7-43 7-42
SUPERSERVER 8048B-TRFT USER'S MANUAL

Trusted Computing (Available when a TPM device is detected
by the BIOS)
Configuration
Security Device Support
Select Enabled on this item and enable the TPM jumper on the motherboard to
enable onboard security devices to improve data integrity and network security.
The options are
Enabled and Disabled.
TPM (Trusted-Platform Module) State
Select Enabled to enable TPM security settings to improve data integrity and
network security. The options are Disabled and
Enabled .
Pending Operation
Use this item to schedule an operation for the security device. The options are None ,
Enable Take Ownership, Disable Take Ownership, and TPM Clear.
Note:
The computer will reboot in order to execute the pending commands
and change the state of the security device.
Current Status Information: This item displays the information regarding the
current TPM status.
TPM Enable Status
This item displays the status of TPM Support to indicate if TPM is currently
enabled or disabled.
TPM Active Status
This item displays the status of TPM Support to indicate if TPM is currently ac-
tive or deactivated.
TPM Owner Status
This item displays the status of TPM Ownership.

iSCSI Configuration
This item displays iSCSI configuration information:
iSCSI Initiator Name
This item displays the name of the iSCSI Initiator, which is a unique name used
in the world. The name must use IQN format. The following actions can also
be performed:

Add an Attempt

Delete Attempts

Change Attempt Order
7-4 IPMI
Select the IPMI (Intelligent Platform Management Interface) tab to access the fol-
lowing submenu items.
These items indicates your system IPMI firmware revision number and status.
•
IPMI Firmware Revision
•
IPMI Status

BMC Network Configuration
LAN Channel 1 : This feature allows the user to configure the settings for LAN1 Port.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer.
If Static is selected, you will need to know the IP address of this computer and enter
it to the system manually in the field. If DHCP is selected, the BIOS will search for
a DHCP (Dynamic Host Configuration Protocol) server in the network that is at
-
tached to and request the next available IP address for this computer. The options