Supermicro SuperServer 8048B-TRFT, Руководство пользователя

Страница: 40 / 84

Chapter 5: Advanced Serverboard Setup
5-21 5-20
SUPERSERVER 8048B-TRFT USER'S MANUAL
Universal Serial Bus (USB)
Three Universal Serial Bus headers
provide six USB connections on the
baseboard (USB 0/1, 2/3, 6/7). Additionally,
two Type A USB connectors (USB4, USB5)
are also located on the board (cables not
included). Refer to the tables on the right
for pin definitions.
Backplane Accessible
(USB0/1, 2/3, 6/7) USB Connectors
Pin Definitions
USB0/2/6
Pin# Definition
USB1/3/7
Pin# Definition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 NC 5 Key
Type A USB
(USB4/5)
Pin Definitions
Pin# Definition
1 +5V
2 PO-
3 PO+
4 Ground
5 NA
Ethernet LAN Ports
Two Ethernet ports (LAN1/LAN2) are
located on the AOM-X10QBi-A I/O module.
In addition, a dedicated IPMI LAN is also
located on the I/O module to provide KVM
support for IPMI 2.0. All these ports accept
RJ45 type cables.
IPMB I
2
C SMB
A System Management Bus header for
IPMI is located at JIPMB1. Connect an
appropriate cable here to use the IPMB I
2
C
connection on your system.
SMB Header (JIPMB1)
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
Chassis Intrusion
A Chassis Intrusion header is located
at JL1 on the serverboard. Attach an
appropriate cable from the chassis to be
informed of possible chassis intrusion
when the chassis is opened.
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
Internal Speaker
The internal speaker, located at SP1, can
be used to provide audible indications for
various beep codes. See the table on the
right for pin definitions.
Internal Speaker
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
LAN Ports
Pin Definition
Pin# Definition Pin# Definition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED (Yel-
low, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground
T-SGPIO
Pin Definitions
Pin# Definition Pin# Definition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 NC
T-SGPIO1/2 Headers
Two SGPIO (Serial-Link General Purpose
Input/Output) headers are provided on
the serverboard. These headers support
a Serial Link interface for onboard SATA
connections. See the table on the right for
pin definitions.
Power SMB (I2C) Connector
Power System Management Bus (I
2
C)
Connector (JPI 2 C1) monitors power supply,
fan and system temperatures. See the
table on the right for pin definitions.
PWR SMB (JPI
2
C1)
Pin Definitions
Pin# Definition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V
(NC= No Connection)
(NC= No Connection)