Supermicro SuperServer 8048B-TRFT, Руководство пользователя

Страница: 48 / 84

Chapter 6: Advanced Chassis Setup
6-3 6-2
SUPERSERVER 8048B-TRFT USER'S MANUAL
Figure 6-1. Front and Rear Chassis Views
Figure 6-2. Removing a Hard Drive Carrier
6-2 Control Panel
The control panel is located on the front left handle of the chassis.
See Chapter 3 for details on the LEDs and the control panel buttons.
6-3 Installing Hard Drives
The hard drives are mounted in drive carriers to simplify their installation and
removal from the chassis. These carriers also help promote proper airflow for the
drive bays. As hot-swappable components, the system may continue running while
hard drives are added or replaced to the carriers.
Removing Hard Drive Carriers from the Chassis
1. Press the release button on the drive carrier. This extends the drive carrier
handle.
2. Use the handle to pull the drive carrier out of the chassis.
Hard Drives (24) Control Panel
I/O Ports Power Supplies (4)
Note:
Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the Supermicro
website at
http://www.supermicro.com/products/nfo/files/storage/SAS-1-
CompList-110909.pdf
1
2
1
1