Supermicro SuperServer 8048B-TRFT, Руководство пользователя

Страница: 13 / 84

2-6 2-7
Chapter 2: Server Installation SUPERSERVER 8048B-TRFT USER'S MANUAL
Installing the Outer Rails onto a Rack
Installing the Outer Rails
1. Attach the short bracket to the outside of the long bracket. You must align the
pins with the slides. Also, both bracket ends must face the same direction.
2. Adjust both the short and long brackets to the proper distance so that the rail
fits snugly into the rack.
3. Secure the long bracket to the front side of the outer rail with two M5 screws
and washers and the short bracket to the rear side of the outer rail with three
M5 screws and washers. Keep the screws slack so that they may be adjusted
later.
4. Repeat steps 1-3 for the left outer rail.
Figure 2-3. Assembling the Outer Rails
Secure to the
Front of the Rack
Secure to the
Rear of the
Rack
Fixed Pins
Attach Outer
Rails Together
Screws and
Washers
Screws and
Washers
Figure 2-4. Installing the Outer Rails to the Rack
1
3
1
2
Note: figures are for illustrative purposes only. Always install servers into racks
from the bottom up.
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.