Supermicro SuperServer 8048B-TRFT, Руководство пользователя

Страница: 14 / 84

2-8 2-9
Chapter 2: Server Installation SUPERSERVER 8048B-TRFT USER'S MANUAL
Figure 2-4. Installing the Chassis into a Rack
Installing the Chassis into a Rack
Installing the Chassis into a Rack:
1. Confirm that chassis includes the inner rails (A) Also, confirm that the outer
rails (B) are installed on the rack.
2. Line chassis rails (A) with the front of the rack rails (B).
3. Slide the chassis rails into the rack rails, keeping the pressure even on both
sides (you may have to depress the locking tabs when inserting). When the
server has been pushed completely into the rack, you should hear the locking
tabs "click" into the locked position.
4. Tighten up all the screws on the front side and rear side of both outer rails.
5. (Optional) Insert and tightening the thumbscrews that hold the front of the
server to the rack.
1
A
1
B
Note: figures are for illustrative purposes only. Always install servers into racks
from the bottom up.
Figure 2-5. Removing the Chassis From the Rack
Removing the Chassis from the Rack
Caution! It may be dangerous for a single person to off-load the heavy chassis
from the rack without assistance. Be sure to have sufficient assistance supporting
the chassis when removing it from the rack.
Removing the Chassis from the Rack
1. Pull the chassis forward out the front of the rack until it stops.
2. Press both of the black plastic release latches on each of the inner rails
downward simultaneously and move the chassis forward in the rack.
3. When the chassis stops a second time, press both of the black plastic release
latches on the rear of the inner rails downward simultaneously to fully remove
the chassis from the rack.
1
2
1
3