Sungrow SG3425UD-MV, Системное руководство

Страница: 33 / 121

25
5.4.1 Installing the Drain Valve(Optional)
Overview
The installation positions of the drain valve are reserved at the bottom of the MV Station,
which are located on the front and back of the MV Station, as shown in figure A below.
Installation Parts
Before installing the drain valve, the required parts:
• Connector(in the scope of delivery)
• Drain valve(in the scope of delivery)
• Oil pipe (beyond the scope of delivery)
Installation Methods
step 1 Screw the connector into the mounting hole at the bottom of the MV Station.
step 2 Install the drain valve on the connector.
step 3 (Optional operation) Connect the oil pipe to the drain valve.
- - End
Precautions
• If the oil pipe is connected, the drain valve needs to be opened.
• If the oil pipe is not connected, the drain valve needs to be closed.
5.4.2 Installating Oil-Water Separator (Optional)
Overview
The installation position of the oil-water separator is reserved at the bottom of the MV
Station, which are located on the front of the MV Station, as shown in figure A below.
System Manual 5 Mechanical Installation