Sungrow SG3425UD-MV, Системное руководство

Страница: 70 / 121

62
History faults can be viewed from this sub-menu, with up to 5 records can be shown in one
page. The upper left side of the event table is the total number of the current fault records.
Tap “Prev” or “Next” to turn pages up or down.
- - End
9.9.4 Checking History Alarm
Proceed as follows to check the history warn information:
step 1 Tap “Function” from the default menu.
step 2 Tap “History-information” and enter into the history information sub-menu.
step 3 Tap “his-alarm” and enter into the history alarm sub-menu.
History alarms can be viewed from this sub-menu, with up to 5 records can be shown in one
page. The upper left side of the event table is the total numbers of the current warn records.
Tap “Prev” or “Next” to turn pages up or down.
- - End
9.10 Checking Present Fault Information
There may be one or more than one fault occurs to one or more than one unit inside the MV
Station at the same time which can be viewed through the LCD screen. Follow the
description in this chapter to view the fault information when faults occur.
If there is a fault, the “Work State” will show “Fault”.
Tap the “Fault” cell.
The state column of the unit that has fault will
display “Fault. As shown in the left figure, a fault
occurs to module unit 2. Tap the fault cell of module
unit 2 to check the present fault.
The fault interface of module unit 2 will appear with
the fault item in red.
9 LCD Menu Operation System Manual