Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 203 / 224

Chapter 10 The Solaris 7 11/99 Operating Environment on the Sun Enterprise 10000 Server 191
Note – You should have an alias (usually
net
) in OBP for the proper network
interface. Use that alias with the
boot
(1M) command, as shown in the example
above. Otherwise, you must type in the complete OBP device path. If you specify an
alias (or path) that does not describe the proper network interface, the
boot
(1M)
command will fail.
● In the
netcon
(1M) window, boot the system from the network.
The
boot net
command starts the
suninstall
utility. This utility prompts you to
provide site and platform-specific information. Refer to the following table for the
platform-specific information you may need to supply. If you have questions about
the
suninstall
utility, please refer to the Installation Instructions for Solaris 7 11/99
(SPARC Platform Edition) in your media kit.
ok boot net
TABLE 10-5
Platform-Specific Information for the
suninstall
Utility
If you are asked to Do this
Please enter the
hostname of the SSP for
domain_name
[default_name] Enter the hostname for your SSP. Note that the default is to
append
-ssp
to the domain_name.
Set the network
information Select the appropriate level of information you want to provide.
If you select any option other than
None
, the
suninstall
utility displays a series of dialogs that request configuration
information. Provide that information.
Solaris Interactive
Installation Select
Upgrade
.
Select 64 bit Click “Select To Include Solaris 64-bit Support” to install the
64-bit kernel. Refer to the Solaris 7 Release Notes Supplement for
instructions on how to check the operating mode, to set the
default mode, and to switch the operating mode.
Select Software Select
Entire Distribution plus OEM Support
.