Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 179 / 224

Chapter 10 The Solaris 7 11/99 Operating Environment on the Sun Enterprise 10000 Server 167
3. Manually edit the
/etc/ethers
file to include the Ethernet address of the new
domain.
The correct entries would look similar to the following
/etc/ethers
sample. Note
that
tacos
represents the name of the new domain in this example:
You are done configuring the domain network information. If you use NIS at your
site, check with your network administrator about what configuration issues must
be addressed before you continue the installation. NIS issues are out of the scope of
this chapter. Otherwise, you can now set up the SSP as a boot server, as described in
the next section.
▼
To Set Up the SSP
1. Insert the Solaris CD into the CD-ROM drive on the SSP.
After inserting the CD, wait about one minute for the volume manager to mount the
CD-ROM.
2. Log in to the SSP as superuser.
3. Change to the
Tools
directory on the CD.
8:0:20:87:58:a5 snax-ssp vegetables
8:0:20:87:58:a5 snax-ssp vegetables
0:0:be:01:00:1e snax-cb0
0:0:be:01:00:57 snax-cb1
0:0:be:a6:50:2f pizza
0:0:be:a6:6f:19 chips-priv
0:0:be:a6:6f:23 nachos
0:0:be:a6:6f:2a tacos
ssp# cd /cdrom/cdrom0/s0/Solaris_2.7/Tools