Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 183 / 224

Chapter 10 The Solaris 7 11/99 Operating Environment on the Sun Enterprise 10000 Server 171
2. In the SSP window, open a
netcon
(1M) session.
The
ok
prompt is displayed after a few minutes. The duration depends directly on
the size of the domain.
You are done bringing up the domain. You can now set up the OpenBoot PROM, as
described in the next section.
▼
To Set Up the OBP Environment
1. Use the
devalias
command to check for duplicate
devaliases
entries in OBP.
The
suninstall
utility may not work properly if you have defined duplicate
devaliases
in OBP. Use the
devalias
command to check the aliases. The output
may resemble the following example:
Note –
If any
devaliases
are defined twice (
net
is defined twice in the above
example), you should remove the extra
devalias
entries.
2. If any duplicate entries exist in the
devalias
list, remove them.
The following example removes the last-created
net devalias
. You may have to
issue a second
nvunalias
command if the second
net
alias is the incorrect one.
Then issue an
nvalias
command to create the correct
net
device alias.
ssp% netcon -g
ok devalias
net /sbus@41,0/qec@0,20000/qe@1,0
ttya /ssp-serial
ssa_b_example /sbus@40,0/SUNW,soc@0,0/SUNW,pln@b0000000,XXXXXX/SUNW,ssd@0,0:a
ssa_a_example /sbus@40,0/SUNW,soc@0,0/SUNW,pln@a0000000,XXXXXX/SUNW,ssd@0,0:a
isp_example /sbus@40,0/QLGC,isp@0,10000/sd@0,0
net_example /sbus@40,0/qec@0,20000/qe@0,0
net /sbus@41,0/qec@0,20000/qe@0,0
ok
ok nvunalias net