Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 177 / 224

Chapter 10 The Solaris 7 11/99 Operating Environment on the Sun Enterprise 10000 Server 165
3. Use the
domain_create
(1M) command to create the domain.
Where domain_name is the name of the domain specified in Step 2, board_numbers is a
list of the system boards, delimited by spaces, to be included in the domain,
OS_version is the version of the domain’s operating system, and platform_name is the
name of the platform as defined during the SSP package configuration.
If you upgraded the SSP software to SSP 3.1.1 or SSP 3.2, the OS_version should be
5.7. If you did not upgrade the SSP software, the OS_version should be 2.7.
Refer to the Sun Enterprise 10000 SSP User Guide for additional information.
4. Check the power to the domain.
The output of the
power
(1M) command depends greatly on the configuration of the
server. If you are unfamiliar with the output, refer to the
power
(1M) for an
explanation, or contact your service provider for an explanation of the output.
5. If you have determined that elements of the domain are powered off, power on
those elements.
You are done creating the domain. You can now install a fresh copy of the Solaris
operating environment, as described in the following section.
Performing a Fresh Install
This section contains instructions on how to perform a fresh installation of Solaris 7
11/99. The installation includes the following tasks:
■
Configuring the domain network information
■
Setting up the SSP
■
Bringing up the domain
■
Installing a fresh copy of the boot image
■
Configuring the Solaris operating environment
■
Configuring the OBP environment
ssp% domain_create -d
domain_name
-b
board_numbers
-o \
OS_version
-p
platform_name
ssp% power
ssp% power -on