Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 126 / 224

114 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999
▼
To Upgrade to the Solaris 7 11/99 Operating
Environment
1. Type
su
to become superuser.
2. Back up the data on your system.
Refer to the System Administration Guide, Volume I for information.
3. Stop all processes (database or other applications) that are accessing
SPARCstorage Array disks except
/
,
swap
,
/usr
, and
/opt
.
4. Insert the Solaris 7 11/99 CD into the CD-ROM drive and upgrade your system to
the Solaris 7 11/99 operating environment.
Refer to Chapter 1, "Installing Software from the Solaris CD" and the SPARC:
Installing Solaris Software manual for more information.
Caution –
Do not select the system to reboot at the end of the Solaris installation
setup.
5. Determine which level of SPARCstorage Array firmware is in your SPARCstorage
Array(s) by entering the following command at the prompt for each
SPARCstorage Array:
Where controller is the logical controller name of the SPARCstorage Array (for
example, c1). Look for the line that gives the firmware revision information, similar
to the following:
6. If the firmware revision is below 3.12, download the new firmware for each
SPARCstorage Array:
7. Halt your system:
# ssaadm display
controller
Firmware Rev 3.12
# ssaadm download -f /usr/lib/firmware/ssa/ssafirmware
controller
# /usr/sbin/init 0
!