Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 105 / 224

Chapter 5 Updating the Flash PROM on the Sun Enterprise 3x00, 4x00, 5x00, and 6x00 Systems 93
7. The update then prompts you if you want to continue. Make sure that you have
turned the keyswitch to the On or Diagnostics position then type y. The flash
PROMs are updated.
8. After the flash PROMs are updated, the system asks if you would like to halt the
system. Type yes.
Are you sure that you wish to continue? y/[n] : y
Updating Board 0: Type ’cpu’ (PromID=1a4)
1 Erasing ................................ Done.
1 Verifying Erase ................................ Done.
1 Programming ................................ Done.
1 Verifying Program ................................ Done.
Updating Board 1: Type ’upa-sbus’ (PromID=1a4)
1 Erasing ................................ Done.
1 Verifying Erase ................................ Done.
1 Programming ................................ Done.
1 Verifying Program ................................ Done.
Updating Board 4: Type ’dual-pci’ (PromID=1a4)
1 Erasing ................................ Done.
1 Verifying Erase ................................ Done.
1 Programming ................................ Done.
1 Verifying Program ................................ Done.
Updating Board 6: Type ’dual-pci’ (PromID=1a4)
1 Erasing ................................ Done.
1 Verifying Erase ................................ Done.
1 Programming ................................ Done.
1 Verifying Program ................................ Done.
Unloading flashprom driver
The new firmware will not take effect until the system is power-
cycled.
Do you wish to halt the system now? yes or no? yes
The system’s shutdown messages are displayed.
Program terminated
ok