Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 178 / 224

166 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999
■
Bringing up the domain
■
Installing the Computer Systems supplements packages
■
Configuring the Network Time Protocol (NTP) packages
■
Finishing the fresh install
▼
To Configure the Domain Network Information
1. Log in to the SSP as superuser.
2. Manually edit the
/etc/hosts
file to include the IP address of the new domain.
You need to get the IP address from your network administrator.
The correct entries would look similar to the following
/etc/hosts
sample. Note
that the new entry is
tacos
:
The
/etc/hosts
file is actually a link to
./inet/hosts
.
Caution –
If the new domain entry follows any other host or SSP entry, the
add_install_client
command may not work in Step 4 in “To Set Up the SSP” on
page 167.
129.153.49.185 tacos
127.0.0.1 localhost
129.153.49.179 snax-ssp vegetables loghost
129.153.49.181 snax-cb0
129.153.49.182 snax-cb1
129.153.49.180 pizza
129.153.49.183 chips
129.153.49.1 marvin-49
110.0.0.1 vegetables-priv
110.0.0.5 chips-priv