Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 135 / 224

Chapter 8 Alternate Pathing 2.2 on the Sun Enterprise 3x00, 4x00, 5x00, and 6x00 Servers 123
4. Install the AP 2.2 host packages on the server:
The software briefly displays copyright, trademark, and license information for each
package, then messages about
pkgadd(1M)
actions taken to install the package,
including a list of the files and directories being installed. Depending on your
configuration, you may see the following message:
If so, type
y
to continue.
When this portion of the installation is complete, the AP 2.2 packages have been
installed and the superuser prompt is displayed.
5. Remove the Supplement CD from the CD-ROM drive:
6. Configure AP.
For an example of the steps you need to follow, see “To Configure AP” on page 123.
Also see the Sun Enterprise Server Alternate Pathing User’s Guide.
▼
To Configure AP
1. Create three to five AP databases:
# pkgadd -d /cdrom/cdrom0/Product SUNWapdoc SUNWapu SUNWapr \
SUNWapdv
This package contains scripts which will be executed
with superuser permission during the process of installing this
package.
Do you want to continue with the installation of this
package [y,n,?]
# cd /
# eject cdrom
# apdb -c
raw_disk_slice
-f