Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 189 / 224

Chapter 10 The Solaris 7 11/99 Operating Environment on the Sun Enterprise 10000 Server 177
2. Copy the part of the string that begins with either
/sbus
or
/pci
.
Example:
/sbus@65,0/SUNW,fas@1,8800000/sd@3,0:a
.
Record your device string here:
You will use this string in the next section.
3. Perform any site-specific configuration tasks on the newly installed environment
by editing the configuration files in the
/a
directory.
The number and extent of any site-specific configuration task, such as configuring
the default router, are highly dependent on the local configuration of the server and
the network on which it resides. If you are unsure about what tasks you should
perform, contact your service provider, or refer to the System Administration Guide.
4. Shut down the domain from the
netcon(1M)
window.
You are done configuring the Solaris operating environment. You can now configure
the OpenBoot PROM variables, as described in the following section.
▼
To Configure the OBP Variables
1. In the
netcon
(1M) window, assign the device string to an alias (refer to Step 2 in
“To Configure the Solaris Operating Environment” for the device_string.
As in this example, the
nvalias
command should be entered on a single line.
/
domain_name
# init 0
ok nvalias
bootdisk_alias device_string