Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 199 / 224

Chapter 10 The Solaris 7 11/99 Operating Environment on the Sun Enterprise 10000 Server 187
8. Shut down the domain before you begin the upgrade.
You are done preparing the domain for the upgrade. You can now check the domain
network information, as described in the following section.
▼
To Check the Domain Network Information
For existing machines, the SSP should already be configured with the domain
network information; however, to ensure that the information is correct, perform the
following steps.
1. Log in to the SSP as superuser.
2. Ensure that the Sun Enterprise 10000 host name and host-name IP address are
correct in the
/etc/hosts
file.
3. Ensure that the Sun Enterprise 10000 host name and Ethernet address are correct
in the
/etc/ethers
file.
You are done checking the domain network information. If you use NIS at your site,
check with your network administrator about what configuration issues must be
addressed before you continue the installation. NIS issues are out of the scope of this
chapter. You can now set up the SSP as a boot server, as described in the following
section.
▼
To Set Up the SSP
1. Insert the Solaris CD disk into the CD-ROM drive on the SSP.
Wait for the Volume Manager to mount the CD-ROM.
2. In the SSP window, change to the
Tools
directory.
domain_name
# shutdown -i0 -g60 -y
ssp# cd /cdrom/cdrom0/s0/Solaris_2.7/Tools