Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 186 / 224

174 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999
Note – You should have an alias (usually
net
) in OBP for the proper network
interface. Use that alias with the
boot
(1M) command, as shown in the example
above. Otherwise, you must type in the complete OBP device path. If you specify an
alias (or path) that does not describe the proper network interface, the
boot
(1M)
command will fail, and you will have to bring up the domain again.
If you install the operating system on a drive other than the one designated as the
boot drive, the
suninstall
utility displays a warning message similar to the
following:
You can safely ignore this warning and press F2 to continue.
The
boot net
command starts the
suninstall
utility. This utility prompts you to
provide site and platform-specific information. Refer to the following table for the
platform-specific information you may need to supply. If you have questions about
the
suninstall
utility, refer to the Installation Instructions for Solaris 7 11/99
(SPARC Platform Edition) in your media kit.
Warning
You have an invalid disk configuration because of the condition(s)
displayed in the window below. Errors should be fixed to ensure a
successful installation. Warnings can be ignored without causing
the installation to fail.
> To go back and fix errors or warnings, select Cancel.
> To accept the error conditions or warnings and continue with the
installation, select Continue.
WARNING: The boot disk is not selected or does not have a “/” mount
point (c0t3d0)
TABLE 10-2
Platform-Specific Information for the
suninstall
Utility
If you are asked to Do this
Please enter the
hostname of the SSP for
domain_name
[default_name] Enter the hostname for your SSP. Note that the default value is
to append
-ssp
to the domain name.
Set the network
information Select the appropriate level of information you want to provide.
If you select any option other than
None
, the
suninstall
utility displays a series of dialogs that request configuration
information. Provide that information.
Solaris Interactive
Installation Select
Initial
for fresh install.