Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 144 / 224

132 Solaris 7 11/99 Sun Hardware Platform Guide • November 1999
4. If you plan to upgrade to the Solaris 7 11/99 operating environment, perform that
upgrade now.
See “Upgrading a System” in Solaris 7 (SPARC Platform Edition) Installation Library.
Note that you must choose the upgrade option to perform an upgrade of the Solaris
software.
Caution –
Wait until the Solaris upgrade process is completely finished before
continuing with this procedure.
Caution –
Make sure you upgrade the correct slice. If you were previously using a
volume manager to mirror the boot disk, and if you were also using AP to
alternately path each boot disk mirror, then there are four physical paths that were
previously potential paths to the boot disk (two alternate paths for each boot disk
mirror). Now that both AP and the volume manager have been deconfigured,
examine
/etc/vfstab
to determine the physical path that corresponds to the root
(
/
) file system. When you run
suninstall
, specify that path as the disk to upgrade.
Later, when you restore your volume manager, be sure to designate that disk as the
primary mirror. See your volume manager documentation for information on
determining which physical slice is used when booting.
5. Upgrade to AP 2.2.
a. Log in as superuser.
b. If necessary, re-insert the Supplement CD into the CD-ROM drive.
The volume manager takes a few seconds to mount the CD.
c. Install the required AP 2.2 packages:
d. Run the following script to restore the original AP configuration.
Caution –
Be sure to read “Upgrading AP and Solaris Software Simultaneously” on
page 129 before performing the following command.
# cd /cdrom/cdrom0/Product
# pkgadd -d . SUNWapdv SUNWapr SUNWapu SUNWapdoc
# /cdrom/cdrom0/Tools/ap_upgrade_finish
...
ap_upgrade_finish has completed