Sun Microsystems Solaris 7 11/99, Руководство по аппаратной платформе

Страница: 201 / 224

Chapter 10 The Solaris 7 11/99 Operating Environment on the Sun Enterprise 10000 Server 189
▼
To Bring Up the Domain
1. In an SSP window, ensure that the
SUNW_HOSTNAME
variable is set to the proper
domain name.
Note –
The
domain_switch
(1M) command must be executed from the C shell. By
default, the SSP window is a C shell.
2. Use the
domain_status
(1M) command to ensure that the OS version is set to the
proper value.
If you upgraded the SSP software to SSP 3.1.1 or SSP 3.2, the OS version should be
5.7. If you did not upgrade the SSP software, the OS version should be 2.7. If the OS
version is set to the proper value, proceed to Step 3. If not, perform the following
steps:
a. Remove the existing domain.
The
domain_remove
(1M) command prompts you to save the domain directories,
as in the following example:
Be sure to answer yes,
y
, to the prompt so that the domain information is saved. If
you answer no, you will have to supply the board numbers and the platform
name for the new domain.
ssp% domain_switch
domain_name
ssp% domain_remove -d
domain_name
domain_remove: The following subdirectories contain domain specific
information such as messages files, configuration files,
and hpost dump files. You may choose to keep these
directories if you still need this information. This
domain may be created with or without this information
being saved.
/var/opt/SUNWssp/adm/xf4-b3
/var/opt/SUNWssp/etc/allxf4/xf4-b3
Keep directories (y/n)? y
Domain : xf4-b3 is removed !