Sulky VISION-X DPB, Оригинальное руководство пользователя

Страница: 125 / 155

EN
a) “ REG ” (settings) menu
- 1 -
Select the REG (Settings) menu.
- 2 -
Program the INDEX that corresponds to the tyres.
- 3 -
Check that all the parameters have been saved
correctly: speed coefficient
and working width
.
- 4 -
Select your fertilizer , check the conveyor belt
SPEED selection (Slow, Medium or Fast) and the
use of the application rate REDUCER (Yes or No).
(consult the machine instruction manual).
- 5 -
Select then then , and perform
the tare (if the machine is fitted with static weigh-
ing device)
Note:
You may now fill the spreader hopper.
- 6 -
Select or (key available only with booms
) for the adjustment of the opening of
the boom valves (Consult the specific instructions
for AUTOMATIC VALVES).
b) “ INFO ” menu
- 1 -
Select the INFO menu.
- 2 -
Select mode.
- 3 -
Reset each counter to zero using the (RTZ)
function.
- 4 -
As soon as the alarm sounds and the bell appears
on the screen, select
to find out why.
Select OK to return to the initial screen.
- 5 -
Select if you wish to save your work.
- 6 -
Check that the rotation speed of the spreading
system is adequate (consult the machine’s
instruction manual).
c) “ EPAN ” (spreading) menu
- 1 -
Select the EPAN (Spreading) menu.
-
2
- Check:
• That the product selection is correct.
• That the conveyor belt speed is correct
= Slow,
= Medium, (or without gearbox)
= Fast,
and that it corresponds to the combination fitted on
the gearbox at the rear of the machine.
• That the position of the application rate reducer,
= NON (NO), = OUI (YES), corre-
sponds to the position on the machine.
- 3 -
Programme the dose per hectare, use the numeric
keypad directly and confirm with .
- 4 -
Carry out a flow rate test
(see section
2 C
Setting the flow rate”).
- 5 -
You can adjust your application rate / hectare:
select
or ,then return to the initial rate by
selecting or
which will be displayed.
- 6 -
You can adjust
the right-hand side by selecting
or the left-hand side by selecting
Return to the same right / left hand application
rate by selecting
.
- 7 -
You may activate the Tribord 3D (with granule
discs
), or the working width sectioning
(with booms ).
125
3
Quick start-up