Programming and installation manual Careline Anna / Careline GSM
Doc. no. 32-022-03-01 EN v6
2.3
Connection to the analogue telephone network
Connect the telephone cable into the supplied telephone adaptor and to the carephone in the socket closest to
the on/off button (see Image 3 below). The regular telephone plug should be connected to the supplied
telephone adaptor and then connected to the primary telephone socket at home.
Note!
It is important that the carephone is connected to the primary socket (the main socket) in the home in
order to achieve complete security! If you do not do this, your carephone may not be able to call the alarm
recipient, for example, if you have another phone in the home that is not on the receiver. To check which the
primary socket is, lift all the handsets off the receivers in the home. The handset which still has a dial tone is the
primary. If more than one handset has the dialling tone at the same time, the phone socket is not connected
properly and must be adjusted by an authorised installer.
Image 3. Here you can see in which jack the telephone cable (white) and mains adapter (black) are to be
connected.
2.4
Connection to mobile network
To insert a SIM card in Careline GSM:
Loosen the screw to the battery cover and pull it out.
Slide the SIM card into the holder as shown in image 4 below.
Slide the battery cover back in place (hold the SIM card if it does not slide easily) and attach the cover with
the screw.
Image 4. Slide the SIM card into the SIM card holder.
