Programming and installation manual Careline Anna / Careline GSM
Doc. no. 32-022-03-01 EN v6
5
Programming of the carephone Careline Anna/GSM
Programming the carephone is easy to do with a pre-programmed hand terminal of the model HT-III (see section
4.2). Many of the more common programming services, such as programming of accessories and changing the
speaker volume can also be done by using the buttons on top. Listed below are descriptions of the operation of
the most common tasks.
5.1
Programming of Careline Anna/GSM using the hand terminal
5.1.1
Connecting the hand terminal to the Careline Anna/GSM
To connect the hand terminal to the Careline Anna/GSM, carry out the procedure below:
Connect the hand terminal to the back of the carephone by disconnecting the mains adapter from the
carephone and instead put the narrow end of the red cable into this socket (labelled 12V). The other end
of the red cable should be connected to the hand terminal's middle socket. (See image 8 below.)
Plug the mains adapter into the hand terminal's smallest socket.
Turn on the carephone by setting the switch to 1. (If it was already turned on, restart it.) The hand terminal
now connects automatically.
Proceed with any further programming, as per with sections 5.1.2 and 5.1.3.
Image 8. Connect the red cable to the carephone and HT-III, and connect the mains adaptor to HT-III.
