Programming and installation manual Careline Anna / Careline GSM
Doc. no. 32-022-03-01 EN v6
Choose
Security
, press
Yes
.
Choose
SIM lock
, press
Yes
.
Choose if the SIM lock should be activated or not by using
and
.
(The SIM lock means that you have a
PIN code activated on your SIM card to increase security.)
Press
Yes
to accept.
If you want to activate the SIM lock, choose
PIN code
and press
Yes
.
Enter the PIN code for the SIM card (note that the PIN must be have been set before, the carephone cannot
do this)
Press
Yes
to accept.
Press
No
4.2.9
Save in the preset area
When all installations are complete they shall be saved in the hand terminal's preset area.
Press
No
once
Choose
Save to preset,
press
Yes
Enter
1789
Choose preset area
Press
Yes
if you want to save in area 1. Otherwise delete with
and then write the number of the area you
wish to save in and press
Yes
.
Confirmation that the settings have been saved is displayed, press
Yes
.
Press
No
once to return to the main menu.
Go to
Finish
, press
Yes
Press
No
Disconnect the mains adaptor
The programming is now complete and the hand terminal is ready to use!
Remember to always test that everything works as you intended when you change any settings in the hand
terminal. Program a carephone with these changes and test the alarm. Also check what happens if you do
not respond to the alarm, i.e., that it goes to the secondary alarm receiver, etc.
4.2.10
Configure other settings to save in the hand terminal
The above sections describe the step-by-step standard programming procedure in the hand terminal. It is also
easy to make changes in other settings and save them. Use the menu map in Appendix H to find the specific
function. Go in and change to the correct value and press
Yes
. Then follow the instructions in section 4.2.9 to save
these settings.
Program
Load from phone
Load std.values
>
Save to preset.
<
PROGRAMMING
COMPLETED
Disconnect the Hand
terminal
PROGRAMMING
>
Program
<
Load from phone
Load stdvalues
Edit alarm code
Speaker Vol.
>
Quit
<
Programming
Send changes
to phone?
Press Yes / No
Enter password:
- - - -
SAVE TO PRESET.
State area:
(1-7) 1
