Programming and installation manual Careline Anna / Careline GSM
Doc. no. 32-022-03-01 EN v6
The Hand terminal has a display on the top. The display shows the different lines of text that guide the user
through programming. Below the display there are buttons for the digits
0-9
and letters
A
-
Z
as well as symbols
such as
Yes, No, ,
*
, #, , T
and
OK
.
4.1.1
General Functions of the Hand Terminal
Control Function
Yes, OK
Accept the entered value or go forward in the menu
No
Leave the current menu level, and ignore entered value
Up in the menu
Down in the menu
Back one symbol
Forward one symbol
T
Enter 'wait for dial tone' in the phone number or activate the receiving of the radio code from the
alarm transmitter
Delete the symbol to the left of the cursor
Careline Anna/GSM can be programmed to wait 500 ms before the phone is switched. Use
-
button when you
enter the phone number to enter a
W
.
The display of the hand terminal shows four rows such as:
There can be more rows in the menu that are not displayed. To switch between the different choices in the menu
use
and
on the hand terminal. The current choice is marked with > and <. If, for example, you want to switch
from A to C, press the
button twice on the hand terminal.
4.1.2
Memory in the Hand Terminal
The Hand terminal has three different types of memory, where data is stored. The different memory functions are
described here, and image 6 below shows how data is transferred between them.
Work area Contains the values that you work with when using the hand terminal. You can obtain value from the
carephone, or reset the area or any preset parts of the work area. The values that are applicable in the work area
are the ones sent to the carephone.
Note! If you make changes to the work area, but then quit the program
without saving these values in the preset area, they will be gone the next time you connect the hand terminal.
The area This area always has a basic setting which is standard for all the hand terminals and non-programmed
carephones and as you can see in the image you can never change the data in the reset area.
Preset area In the preset area you can find the data saved by yourself in the Hand terminal. When you start the
Hand terminal the values are retrieved from the preset area 1. Each model of the carephone has seven own preset
areas where you can save different settings.
PHONE NUMBERS
Number A
Number B
>Number C <
PHONE NUMBERS
>Number A <
Number B
Number C
