Programming and installation manual Careline Anna / Careline GSM
Doc. no. 32-022-03-01 EN v6
1.4
Buttons, Careline Anna/GSM
Careline Anna/GSM has three buttons on the top, all designed to be easy to push on. The buttons are:
Active Alarm (Red)
Reset (Green)
Present/Ready (Grey)
When you press the alarm button (or alarm transmitter) the carephone normally waits for 10 seconds before the
alarm is redirected. During this time, you hear an alarm signal and the alarm can be cancelled by pressing the
green button. Some alarms ring silently, for example, technical alerts such as test alarms and the battery alarm.
These cannot be cancelled with the green button.
If you wish a Present/Finish function can be activated so that the grey button on the carephone can be used to
register when staff are currently with the care recipient. (This is done via the hand terminal. The feature is found in
the menu, "Plus Alarm.") When the staff arrives to the care recipient, they notify this by pressing the grey button
on the carephone. When the button is pressed, the alarm signal and present indicator light up on top of the
carephone. When the staff is ready to leave the care recipient, the grey button is pressed again and a received
signal is heard. In this way, information on the length of stay can be collated in the system for each individual
care recipient.
1.4.1
Table of the button features
The table below describes the functions activated via buttons on the Careline Anna/GSM
Control
Function
Press the red button in normal mode
Alarm is activated
Press the red button when the phone is ringing
( 1)
The call is connected
Press green button during the call
( 1)
Dialling of the alarm is cancelled
Press the grey button in normal mode
(1)
Present/Ready signal
Hold the green button down, press the grey and red.
Programming Mode
Release on audio signal.
Hold the green button down, press the grey and red.
Restart
Release when the LEDs flash rapidly.
Hold the green button down, 2 press the red button
(1)
Present/Ready
Hold the green button and red button down for 3 s
Manual, test alarm
Press green button down during start-up
Activate function test
Hold red button down during start-up
(2)
Programming mode of radio transmitters
Press the grey button in the transmitter programming mode
(2)
Deprogramming of radio transmitter
Hold down the green button for three seconds
(2)
Away mode is activated/deactivated
1) Requires that the feature is enabled in the carephone.
2) See instructions in section 5.2.
For a description of the functions in the programming mode, see section 5.2
