manualshive.com logo in svg

South Bend Tools SB1119, Руководство пользователя, Страница: 8 / 76

Поделиться
Скачать
South Bend Tools SB1119 Скачать руководство пользователя страница 8

-6-

For Machines Mfd. Since 3/21

South Bend Tools

Model SB1119/SB1120

I N T R O D U C T I O N

SB1119 Product 
Specifications

Model SB1119

Page 1 of 3

Model SB1119

3 HP Single­Phase Spindle Shaper

Product Dimensions

Weight............................................................................................................................................................. 660 lbs.
Width (side-to-side) x Depth (front-to-back) x Height......................................................... 39-1/2 x 34 x 51-1/2 in.
Footprint (Length x Width)................................................................................................................. 25-1/2 x 31 in.

Shipping Dimensions

Type.......................................................................................................................................................... Wood Crate
Content.......................................................................................................................................................... Machine
Weight............................................................................................................................................................. 780 lbs.
Length x Width x Height................................................................................................................... 44 x 39 x 58 in.

Electrical

Power Requirement......................................................................................................... 230V, Single-Phase, 60 Hz
Full-Load Current Rating.................................................................................................................................... 20A
Minimum Circuit Size.......................................................................................................................................... 20A
Connection Type..................................................................................................................................... Cord & Plug
Power Cord Included............................................................................................................................................. Yes
Power Cord Length.......................................................................................................................................... 120 in.
Power Cord Gauge......................................................................................................................................... 12 AWG
Plug Included........................................................................................................................................................ Yes
Included Plug Type.............................................................................................................................................. 6-20
Switch Type....................................................................................... Control Panel w/Magnetic Switch Protection
Inverter (VFD) Type............................................................................................................................. Delta ME300
Inverter (VFD) Size............................................................................................................................................ 3 HP

Motors

Main

Horsepower............................................................................................................................................... 3 HP
Phase.................................................................................................................................................... 3-Phase
Amps............................................................................................................................................................. 8A
Speed................................................................................................................................................ 3450 RPM
Type........................................................................................................................................ TEFC Induction
Power Transfer .......................................................................................................................................... Belt
Bearings................................................................................................ Shielded & Permanently Lubricated

Product Specifications

P.O. Box 2027, Bellingham, WA 98227  U.S.A.

www.southbendtools.com

PHONE: (360) 734-1540  •  

© South Bend Tools

Содержание SB1119













































































Отзывы:

Нет отзывов