manualshive.com logo in svg

South Bend Tools SB1119, Руководство пользователя, Страница: 7 / 76

Поделиться
Скачать
South Bend Tools SB1119 Скачать руководство пользователя страница 7

South Bend Tools

For Machines Mfd. Since 3/21

Model SB1119/SB1120

-5-

I N T R O D U C T I O N

V.  Featherboard Position Lock Handle: 

Loosen 

to adjust featherboard closer or farther away 

from cutterhead along fence (i.e., workpiece 

length) and tighten to secure. 

W.  Featherboard Height Lock Handle: 

Loosen to 

adjust featherboard closer or farther away 

from table (i.e., workpiece thickness) and 

tighten to secure.

X. Featherboard:

 Guides and supports 

workpiece as it moves past cutterhead.

V

V

X

X

W

W

Figure 

Figure 7. Featherboard controls and components.

. Featherboard controls and components.

V

V

Z.  Spindle Assembly Lock Handle: 

Locks/

unlocks spindle seat to change spindles.

AA. Motor Bracket Handle:

 Engages and releases 

V-belt tension.

Z

Z

Figure 

Figure 9. Inside cabinet controls.

. Inside cabinet controls.

AA

AA

W

W

Y.  Cabinet Door: 

Allows access to inside cabinet 

for maintenance, service, or to change 

spindles.

Y

Y

Figure 

Figure 8. Cabinet door location.

. Cabinet door location.

Содержание SB1119













































































Отзывы:

Нет отзывов