South Bend Tools SB1119 Скачать руководство пользователя страница 74

Страница: 74 / 76

-72-

For Machines Mfd. Since 3/21

South Bend Tools

Model SB1119/SB1120

P A R T S

Machine Labels

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

201 PSB1119201 CUTTER WARNING LABEL

207 PSB1119207 MODEL NUMBER LABEL (SB1119)

202 PSB1119202 ELECTRICITY LABEL

207 PSB1120207 MODEL NUMBER LABEL (SB1120)

203 PSB1119203 TOUCH-UP PAINT, SB DARK BLUE

208 PSB1119208 SOUTH BEND NAMEPLATE 152MM

204 PSB1119204 TOUCH-UP PAINT, SB LIGHT BLUE

209 PSB1119209 MACHINE ID LABEL (SB1119)

205 PSB1119205 DISCONNECT POWER COMBO LABEL

209 PSB1120209 MACHINE ID LABEL (SB1120)

206 PSB1119206 OPERATIONAL WARNING COMBO LABEL

INJURY HAZARD

Do not use machine
if you have not read
the manual. Visit
southbendtools.com
or call 360-734-1540
to get a manual.

WARNING!

INJURY HAZARD

To reduce risk of
short- and long-term
injury, wear eye,
ear, and lung
protection when
using this machine.

WARNING!

ENTANGLEMENT

HAZARD

Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.

SB1119

WARNING!

INJURY/SHOCK

HAZARD

To avoid shock or

accidental starting,

disconnect power

before adjusting or

servicing machine.

INJURY HAZARD

Keep door closed
while machine is
operating. Disconnect
power before
opening door.

WARNING!

203

205

206

207

208

205

ROTATING CUTTER!

Keep hands away during operation

and only operate with guard installed.

WARNING!

201

WARNING!

INJURY/SHOCK

HAZARD

To avoid shock or

accidental starting,

disconnect power

before adjusting or

servicing machine.

INJURY HAZARD

Keep door closed
while machine is
operating. Disconnect
power before
opening door.

WARNING!

209

204

202

Made in Taiwan to South Bend Specifications

WARNING!

Serial No:

MFG Date:

Motor: 3 HP, 230V, 3-Ph, 60 Hz
Full-Load Current Rating w/VFD: 20A
Spindle Sizes: 3/4", 1-1/4"
Spindle Speeds: Variable; 5000–10,000 RPM
Maximum Cutter Diameter: 7"
Table Size: 39-1/4" x 31-1/2"
Table Insert Sizes: 2-1/2", 4-1/8", 5-3/4"
Table Counterbore: 8-1/4" x 3/16"
Weight: 660 lbs.

MODEL SB1119

3 HP SINGLE-PHASE SPINDLE SHAPER

SINCE

1906

To reduce risk of serious injury when using this machine:

  1. Read and understand owner’s manual before operating.
  2. Always wear approved eye protection and respirator.
  3. Avoid entanglement with moving parts—tie back long hair, roll up
    long sleeves, and do not wear loose clothing, gloves, or jewelry.
  4. Disconnect power before changing cutters or adjusting/servicing shaper.
  5. Before starting, ensure shaper is stable and properly set up, guards
    are in place, and both spindle nuts are tight.
  6. Always use overhead guard or a guarding fixture when free-hand shaping or
    when adjustable fence is not in place.
  7. Always keep fingers at least 6" away from spinning cutter—use jigs, holding
    fixtures, or a power feeder when necessary to maintain a safe distance.
  8. Always feed workpiece against rotation of cutter.
  9. Do not use awkward hand positions while feeding workpiece.
10. Reduce risk of kickback by taking multiple passes when removing a large
    amount of material.
11. Never operate shaper while intoxicated, distracted, or tired.
12. Do not expose machine to rain or dampness.
13. Prevent unauthorized use by children or untrained users; restrict access or

disable machine when unattended.

175370

The safety labels provided with your machine are used to make the operator aware of the

machine hazards and ways to prevent injury. The owner of this machine MUST maintain the

original location and readability of these safety labels. If any label is removed or becomes

unreadable, REPLACE that label before using the machine again. Contact South Bend Tools at

(360) 734-1540 or www.southbendtools.com to order new labels.

Made in Taiwan to South Bend Specifications

WARNING!

Serial No:

MFG Date:

MODEL SB1119

3 HP SINGLE-PHASE SPINDLE SHAPER

SINCE

1906

To reduce risk of serious injury when using this machine:

disable machine when unattended.

INJURY HAZARD

Do not use machine
if you have not read
the manual. Visit
southbendtools.com
or call 360-734-1540
to get a manual.

WARNING!

INJURY HAZARD

To reduce risk of
short- and long-term
injury, wear eye,
ear, and lung
protection when
using this machine.

WARNING!

ENTANGLEMENT

HAZARD

Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.

SB1119

SB1119 Machine Labels

(5/27/21)

• Scale= 1:1
(unless otherwise noted)
• Labels MUST be made of
chemical-resistant material

FOR SOUTH BEND MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT

WRITTEN APPROVAL!

South Bend will not accept labels changed without approval.

If artwork changes are

required, contact us immediately at [email protected].

COLOR CODES

SOUTH BEND LOGO RED

PANTONE 180 C or RAL 2002

PANTONE 151 C or RAL 2003

WARNING

CAUTION

PANTONE 109 C

DANGER

PANTONE 485 C or RAL 3001

SOUTH BEND YELLOW

PANTONE 122 C or RAL 1032

MODEL NUMBER

PANTONE COOL GRAY 1C

Note: Labels marked with *** must have individual letters/numbers.
DO NOT print with clear background.

WARNING!

INJURY/SHOCK

HAZARD

To avoid shock or

accidental starting,

disconnect power

before adjusting or

servicing machine.

INJURY HAZARD

Keep door closed
while machine is
operating. Disconnect
power before
opening door.

WARNING!

ROTATING CUTTER!

Keep hands away during operation

and only operate with guard installed.

WARNING!

***

175370

IMPORTANT:

Label marked ### changed since last sending.

###

Содержание SB1119













































































Результаты поиска

Содержание SB1119

Отзывы:

South Bend Tools SB1119, Руководство пользователя, Страница: 74 / 76

Результаты поиска

Содержание SB1119

Отзывы: