South Bend Tools SB1119 Скачать руководство пользователя страница 6

Страница: 6 / 76

-4-

For Machines Mfd. Since 3/21

South Bend Tools

Model SB1119/SB1120

I N T R O D U C T I O N

O. Fence:

Adjusts side to side and forward

and backward to support workpiece during

operation. Each fence is independently

adjustable and both can be removed and

replaced with a zero-clearance or other

custom-made fence.

P. Fence Lock Handles:

Loosen to allow for

independent fence micro-adjustment and

tighten to secure.

Q. Fence Lock Knob (1 of 2):

Loosens to allow

for independent fence adjustment in relation

to cutterhead (side to side) and tightens to

secure.

R. Fence Micro-Adjustment Knobs:

Move each

fence independently forward and backward

(i.e., cutting depth). One turn moves each

fence approximately

⁄

" (.015").

S. Guard/Fence Base Adjustment Knob:

Adjusts guard/fence base forward and

backward on table using rack and pinion.

One turn is approximately 1

⁄

" of movement.

T. Guard/Fence Base Lock Knobs:

Loosen to

allow for guard/fence base adjustment and

tighten to secure.

U. Guard/Fence Base:

Adjusts forward and

backward on table to provide safety and

support as required by operation. Assembly

can be removed or adjusted to use custom-

made box guard for small stock or irregular

shaping.

Figure

Figure 5. Fence controls and components.

. Fence controls and components.

Figure

Figure 6. Guard/fence base controls and components.

. Guard/fence base controls and components.

Figure

Figure 4. Cutter guard controls and components.

. Cutter guard controls and components.

L. Guard Height Lock Knobs:

Loosen to adjust

front cutter guard height and tighten to

secure.

M. Cutter Guard:

Adjusts to protect user from

accidental cutter contact or chips thrown by

cutterhead.

N. Guard Position Lock Knob (1 of 2):

Loosen to

adjust cutter guard forward or backward and

tighten to secure.

Содержание SB1119













































































Результаты поиска

Содержание SB1119

Отзывы:

South Bend Tools SB1119, Руководство пользователя, Страница: 6 / 76

Результаты поиска

Содержание SB1119

Отзывы: