manualshive.com logo in svg

South Bend Tools SB1119, Руководство пользователя, Страница: 10 / 76

Поделиться
Скачать
South Bend Tools SB1119 Скачать руководство пользователя страница 10

-8-

For Machines Mfd. Since 3/21

South Bend Tools

Model SB1119/SB1120

I N T R O D U C T I O N

Model SB1120

Page 1 of 3

Model SB1120

5 HP 3­Phase Spindle Shaper

Product Dimensions

Weight............................................................................................................................................................. 682 lbs.
Width (side-to-side) x Depth (front-to-back) x Height......................................................... 39-1/2 x 34 x 51-1/2 in.
Footprint (Length x Width)................................................................................................................. 25-1/2 x 31 in.

Shipping Dimensions

Type.......................................................................................................................................................... Wood Crate
Content.......................................................................................................................................................... Machine
Weight............................................................................................................................................................. 800 lbs.
Length x Width x Height................................................................................................................... 44 x 39 x 58 in.

Electrical

Power Requirement................................................................................................................. 230V, 3-Phase, 60 Hz
Full-Load Current Rating................................................................................................................................. 16.5A
Minimum Circuit Size.......................................................................................................................................... 20A
Connection Type..................................................................................................................................... Cord & Plug
Power Cord Included............................................................................................................................................. Yes
Power Cord Length.......................................................................................................................................... 120 in.
Power Cord Gauge......................................................................................................................................... 12 AWG
Plug Included........................................................................................................................................................ Yes
Included Plug Type.......................................................................................................................................... L15-20
Switch Type....................................................................................... Control Panel w/Magnetic Switch Protection
Inverter (VFD) Type............................................................................................................................. Delta ME300
Inverter (VFD) Size............................................................................................................................................ 5 HP

Motors

Main

Horsepower............................................................................................................................................... 5 HP
Phase.................................................................................................................................................... 3-Phase
Amps........................................................................................................................................................... 16.5
Speed................................................................................................................................................ 3450 RPM
Type........................................................................................................................................ TEFC Induction
Power Transfer .......................................................................................................................................... Belt
Bearings................................................................................................ Shielded & Permanently Lubricated

Product Specifications

P.O. Box 2027, Bellingham, WA 98227  U.S.A.

www.southbendtools.com

PHONE: (360) 734-1540  •  

© South Bend Tools

Содержание SB1119













































































Отзывы:

Нет отзывов