South Bend Tools SB1119, Руководство пользователя, Страница: 39 / 76

South Bend Tools
For Machines Mfd. Since 3/21 Model SB1119/SB1120
-37-
O P E R A T I O N
Figure Figure 56. Inserting starting pin. . Inserting starting pin.
6. Insert starting pin into table surface, using
pin location that best supports your work
(see Figure 56).
7. Use some type of hold-down fixture and
guard when doing freehand work (see
Figure 57).
Figure Figure 57. Example of using guard when doing . Example of using guard when doing
freehand work (portion of guard removed for clarity). freehand work (portion of guard removed for clarity).
8.
Make a sample cut on a piece of scrap wood.
9.
If everything is correct, feed workpiece along
cutter, using firm pressure to keep work
against rub collar. Only feed against cutter
rotation.
Sometimes the starting pin will not be in the
most advantageous position. If so, firmly clamp a
board in the desired position to act as a starting
pin (see Figure 58). Some type of pivot point
must be used. Notice in Figures 57–58 the
operator is not exposed to the cutting edge of the
cutter. Cutters are removing material from the
bottom of the workpiece.
Using Clamped Board
Figure Figure 58. Example of using starting pin substitute . Example of using starting pin substitute
when needed (guard removed for clarity). when needed (guard removed for clarity).
!